共查询到20条相似文献，搜索用时 64 毫秒
1.
再论德兴斑岩铜矿成矿物质来源 总被引：12，自引：1，他引：11
本文从德兴斑岩体岩石化学、流体包裹体、Ｓr同位素的研究出发,谁了铜厂成矿体系斑岩 内在性地成矿物质运移、聚集的控制作用。结果表明,浅侵位岩浆能产生大量的热液流体。并由中高温高盐度岩浆流体携带铜等成矿物质从深部向上部及边部迁移、聚集,在斑岩体顶部及接触带中、上部沉淀成矿。进上步的研究又支持了德兴斑岩铜矿的正岩浆成因。 相似文献
2.
斑岩铜矿是主要的铜资源,是矿床研究和勘查的重要目标。斑岩铜矿按其与板块构造的关系可分为2种:俯冲带斑岩铜矿和碰撞造山带斑岩铜矿,它们在成矿流体方面有很多区别,其中较大的差别是碰撞造山带斑岩铜矿的钾化蚀变带比俯冲带斑岩铜矿的钾化蚀变带强得多,且范围也相对较宽。文章简述了这2种斑岩矿床的主要地质特征,着重从流体包裹体、蚀变作用和稳定同位素研究来探讨斑铜矿床成矿流体的主要特征,包括成矿流体的成分、形成温度和压力,氢、氧、碳和硫稳定同位素组成。这两种类型的斑岩铜矿中主要发育5种包裹体:M熔体包裹体;Ⅰ液体包裹体;Ⅱ气体包裹体;Ⅲ含子矿物的多相包裹体和CO2_H2O包裹体。Ⅱ类和Ⅲ类包裹体常共存,且均一温度相似,表明成矿流体经历了不混溶和沸腾作用。在Ⅲ类含子矿物的包裹体中发现了含金属硫化物(黄铜矿、黄铁矿)和氧化物(赤铁矿、磁铁矿)子矿物。在斑岩金矿和碰撞造山带的斑岩铜矿中出现CO2_H2O包裹体,在斑岩的斑晶和一些早期石英脉的石英中可见到熔体包裹体以及熔体_流体包裹体,它们代表斑岩岩浆的样品,说明斑岩铜矿的形成经历了岩浆和热液阶段。最近的研究表明,斑岩铜矿的初始流体是中等盐度和密度的岩浆流体。这种流体在上升过程中因压力释放而发生沸腾,形成气体包裹体和含子矿物的高盐度包裹体。 相似文献
3.
西藏多不杂斑岩铜矿床高温高盐度流体包裹体及其成因意义 总被引：22，自引：1，他引：22
多不杂铜矿为班公湖—怒江缝合带上发现的第一处大型斑岩铜矿床,矿床位于羌塘—三江复合板片南缘的多不杂构造岩浆带中。多不杂斑岩铜矿总体上具有典型的斑岩铜矿矿石特征和蚀变分带特点,围绕斑岩体从岩体中心向外,可以划分出三个主要的蚀变带,依次为钾硅化 绢英岩化带、绢英岩化带和黄铁矿化—角岩化带。矿床以岩体内部和外部均发育强烈的磁铁矿化蚀变、而外围青磐岩化带不发育等特征有别于国内其他斑岩铜矿。对斑岩铜矿的流体包裹体特征和均一测温结果表明斑岩铜矿石英含有丰富的流体包裹体,包裹体类型众多,而以大量发育含子矿物多相包裹体为突出特征。子矿物种类有石盐、钾盐、赤铁矿、红钾铁盐、石膏、黄铜矿等,有时一个包裹体含有多达5~6个子矿物,在我国其他斑岩铜矿中是不多见的。金属子矿物大量发育表明流体成矿金属元素含量很高。成矿流体由来自岩浆的高温、高盐度流体和以天水成因为主的中低温、低盐度流体两个流体端员组份组成。高温、高盐度流体为主要成矿流体,以含子矿物多相流体包裹体为代表,其形成温度>450℃,盐度在28%~83%NaClequ.,平均达到58%~60%NaClequ.,流体组分主要属于H2O-NaCl-KCl-FeCl2体系。高温高盐度流体是在浅成条件下于岩浆结晶的最后阶段从浅部岩浆中直接出溶形成的。中低温、低盐度流体主要来源于天水或天水与晚期岩浆热液的混合,温度在360℃以下,盐度3.71%~14.15%NaClequ.。含矿硫化物主要在300~420℃温度区间沉淀,沉淀富集主要与温度降低有关,多不杂斑岩铜矿为与浅成斑岩体侵入有关的高温岩浆热液型斑岩铜矿。与世界上其他斑岩铜矿相比,多不杂斑岩铜矿具有与Bingham和Grasberg等世界级超大型斑岩铜矿相似的流体包裹体和蚀变分带特征,暗示该矿床具备形成超大型斑岩铜矿的潜力。 相似文献
4.
江西银山多金属矿床高盐度包裹体及其成因意义 总被引：13，自引：1，他引：13
流体包裹体岩相学和显微测温学研究表明，银山矿床石英斑岩和金金属矿床中都发现须含石盐的高盐度流体包裹体，表明至少在成矿作用的早期成矿流体为高盐度流体，高盐度流体不是由热水溶液的不混溶作用或沸腾作用形成的，而是直接从饱和水的结晶岩浆熔体中出溶的，银山矿床的成矿流体与斑岩铜矿的成矿流体具有相似性，证实矿床深部可能有隐伏斑岩铜矿。 相似文献
5.
西藏冈底斯斑岩铜矿带驱龙铜矿成矿流体特征及其演化 总被引：20，自引：3，他引：17
驱龙铜矿是西藏冈底斯斑岩铜矿带东段典型的斑岩型铜矿床.流体包裹体研究显示,与成矿有关的包裹体主要分为液相包裹体、气相包裹体和含子矿物多相包裹体3类,它们的均一温度为190℃～510℃;盐度为0.5～52.5 wt%NaCleq.激光拉曼显微探针(LRM)分析表明,各类包裹体中气、液相成分以H2O为主.含子矿物多相包裹体与不同气相充填度的液相包裹体、气相包裹体共存,且均一温度相近,但盐度相差很大,表明成矿流体经历了沸腾作用.从蚀变矿物组合、流体包裹体显微测温分析及LRM分析可以看出,驱龙斑岩铜矿床成矿流体富含Cl-、SO2-4、Na 、K 、Ca2 、CO2-3,具有较高盐度和较强的Cu溶解能力. 相似文献
6.
中条山铜矿流体碳、氧同位素示踪 总被引：6，自引：1，他引：6
中条山铜矿富集区,主要有铜矿峪斑岩型铜矿床和胡篦型、落家河型、横岭关型海底喷流沉积变质型铜矿床。四个铜矿床深部流体包裹体的碳、氧同位素分析样品,无一例外地均落在有关图解上的“地幔多相体系—花岗岩区”与“海相碳酸岩区”之间,表明它们属于低温蚀变作用成矿的一套热液矿床组合。矿石的1δ3CPDB值为-3.3‰~-8.3‰,δ18OSMOW值为10.1‰~19.83‰,包裹体的K/Na<1,富含铜,这些资料显示中条铜矿富集区是深部流体(地幔流体和岩浆流体等)、大气降水和地壳物质组成的极其复杂的成矿系统。 相似文献
7.
莲花山斑岩型Ｗ－Ａｕ矿床矿化脉的流体包裹体氢氧同位素特征表明，成矿流体来自岩浆水与大气水的混合水，从早到晚，岩浆水成分减少，大气水成分增加。成矿流体的氧同位素、流体包裹体的盐度和成矿温度表明，较早的黑钨矿一石英脉形成于岩浆热能及热液向上推进的过程中，而后的白钨矿－硫化物－石英脉和碳酸盐－石英脉形成于岩浆热能及热液向下退缩的过程中。 相似文献
8.
9.
莲花山斑岩型W—Au矿床成矿流体来源及其演化 总被引：2，自引：0，他引：2
莲花山斑岩型Ｗ－Ａｕ矿床矿化脉的流体包裹体氢氧同位素特征表明，成矿流体来自岩浆水与大气水的混合水，从早到晚，岩浆水成分减少，大气水成分增加。成矿流体的氧同位、流体包裹体的盐度和成矿温度表明，较早的黑钨矿－石英脉形成于岩浆热能及热液上推进的过程中，而后的白钨矿－硫化物－石英脉和碳酸盐－石英脉形成于岩浆热能及热液向下退缩的过程中。 相似文献
10.
德兴斑岩铜矿成矿过程的氧、锶、钕同位素证据 总被引：10，自引：0，他引：10
为探讨德兴铜厂斑岩铜矿床成矿热液流体的来源、作用范围、时空演化及Cu在热液流体中的行为和迁移方向等重要问题，对采集于该矿床南部不同蚀变程度的岩石进行了氧、锶、钕同位素分析，结果表明，虽然与铜三斑岩铜矿成矿过程有关的热液流体至少有3种，包括高温岩浆流体、来自深部围岩的非岩浆流体和大气降水，但是起主导作用的是岩浆流体，钕、锶同位素在空间上的变化表明，在成矿流体形成及演化过程中，锶同位素值由斑岩体内部向围岩接触带有规律地升高（0.705→0.711），指示了矿床是因热液流体将成矿元素从岩体内部迁移到接触带附近富集而成的，它符合斑岩铜矿的正岩浆模式，而钕同位素则相对稳定，可作为蚀变侵入体岩浆起源的示踪剂。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献