共查询到20条相似文献，搜索用时 406 毫秒
1.
Design of an offshore wind turbine requires estimation of loads on its rotor, tower and supporting structure. These loads are obtained by time-domain simulations of the coupled aero-servo-hydro-elastic model of the wind turbine. Accuracy of predicted loads depends on assumptions made in the simulation models employed, both for the turbine and for the input wind and wave conditions. Currently, waves are simulated using a linear irregular wave theory that is not appropriate for nonlinear waves, which are even more pronounced in shallow water depths where wind farms are typically sited. The present study investigates the use of irregular nonlinear (second-order) waves for estimating loads on the support structure (monopile) of an offshore wind turbine. We present the theory for the irregular nonlinear model and incorporate it in the commonly used wind turbine simulation software, FAST, which had been developed by National Renewable Energy Laboratory (NREL), but which had the modeling capability only for irregular linear waves. We use an efficient algorithm for computation of nonlinear wave elevation and kinematics, so that a large number of time-domain simulations, which are required for prediction of long-term loads using statistical extrapolation, can easily be performed. To illustrate the influence of the alternative wave models, we compute loads at the base of the monopile of the NREL 5MW baseline wind turbine model using linear and nonlinear irregular wave models. We show that for a given environmental condition (i.e., the mean wind speed and the significant wave height), extreme loads are larger when computed using the nonlinear wave model. We finally compute long-term loads, which are required for a design load case according to the International Electrotechnical Commission guidelines, using the inverse first-order reliability method. We discuss a convergence criteria that may be used to predict accurate 20-year loads and discuss wind versus wave dominance in the load prediction. We show that 20-year long-term loads can be significantly higher when the nonlinear wave model is used. 相似文献
2.
为了得到桶基础承受风、浪动荷载的承载性能,结合我国东海地质条件,统计中国东海2010—2020年浅、深海风速和最大海浪数据,通过计算得到风浪荷载并制成ABAQUS软件幅值曲线施加到海上风电吸力桶基础上,分析了吸力桶基础在动荷载作用下的承载特性。结果表明：吸力桶基础受风、浪荷载影响明显,桶基础迎力面受到风浪动荷载产生拉拔现象。在浅海区,桶基础在风浪荷载作用下桶身自上而下变形不协调,风浪荷载最大的10月份桶基础迎力面最大位移超出了规范0.02D的限制,基础失稳;桶基础背力面受压变形较小。在深海区,桶基础在风浪荷载作用下桶身自上而下变形相对协调,施加风浪荷载后桶体迎力面最大位移为14.9 mm,整体上迎力面位移比背力面位移大4 mm,桶体处于稳定状态。相较浅海区的吸力桶单桶结构,深海区吸力桶结构由于尺寸增加,桶体的稳定性得到提高,说明吸力桶结构的尺寸对稳定性起决定性作用。 相似文献
3.
随着海上风电产业的快速发展,大型浮式风机逐渐从概念设计走向工程应用,但仍面临较大的挑战。一方面,在风、浪等环境载荷的作用下,浮式风机的气动载荷和水动力响应之间存在明显的相互干扰作用;另一方面,风力机大型化使得叶片细、长、薄的特点愈发突出,叶片柔性变形十分显著,这会影响到浮式风机的耦合性能。基于两相流CFD求解器naoe-FOAM-SJTU,结合弹性致动线模型和等效梁理论,建立了浮式风机气动—水动—气弹性耦合响应计算模型,并对规则波和剪切风作用下Spar型浮式风机的气动—水动—气弹性耦合响应进行了数值模拟分析。结果表明,风力机气动载荷使得叶片挥舞变形十分显著,而叶片的扭转变形会明显降低风力机的气动载荷。此外,风力机气动载荷会增大浮式平台的纵荡位移和纵摇角,同时,浮式平台运动响应会导致风力机气动载荷产生大幅度周期性变化。进一步地,叶片结构变形响应会使得浮式风机尾流场的速度损失和湍动能有所降低。 相似文献
4.
介绍某桁架式Spar平台风洞环境载荷测试及分析,为国内首次在风洞中开展的Spar平台风、流载荷模型试验。通过在风洞中模拟真实海洋环境,考虑倾角变化对平台载荷的影响,测试Spar平台水上部分风载和水下部分的流载,给出最大风倾覆力矩风向角,确定平台最容易发生危险的关键风向。试验结果表明:水上部分风阻随纵倾角的增大而增大;风倾覆力矩随倾角增大先增大后减小,在纵倾角10°时达到最大值;水下部分只在流向角-15°～15°范围内,流阻随倾斜角度增大而减小,但最大阻力发生在倾斜角为15°时。试验结果可以为Spar平台设计以及性能预报提供参考。 相似文献
5.
以一6.7 MW风机为研究对象，提出了一种适用于30~50 m水深的海上风电倒Y形导管架筒型基础结构型式，采用三维精细有限元模型对结构的受力特性展开研究，包括结构的自振特性以及在随机风浪流荷载作用下的动力响应。研究结果表明，倒Y形导管架筒型基础采用“三腿变六腿”导管架的结构型式，能够更加有效的将上部荷载传递至下部筒型基础，具有较好的受力特性和传力体系；整机结构的前两阶自振频率均在风机允许运行的频率范围内；在50年一遇极端随机风浪流荷载作用下，整机结构的位移响应和应力响应，均可满足结构安全使用要求。 相似文献
6.
Y. Bangash 《Ocean Engineering》1979,6(3):285-296
The environmental factors that influence the loads imposed on offshore structures are: the ice effects, tidal fluctuations, the wind, the currents and the waves. This paper considers the significance of loads and moments due to wind and currents on offshore gravity platforms. The alogarithm CURLOAD is given to evaluate loads and moments of gravity platforms due to wind and currents alone. This subroutine forms a part of a suite of computer programs F-WAVE which analyse and design gravity platforms under static and dynamic sea load conditions. The programs are tested on Condeep concrete gravity platforms. The output from CURLOAD shows a good agreement with the one predicted by the Condeep designers. In conclusions, the paper gives a comparative study of these results with those produced by the combined effects of wind, currents and waves. 相似文献
7.
Impact Analysis of Air Gap Motion with Respect to Parameters of Mooring System for Floating Platform
In this paper, the impact analysis of air gap concerning the parameters of mooring system for the semi-submersible platform is conducted. It is challenging to simulate the wave, current and wind loads of a platform based on a model test simultaneously. Furthermore, the dynamic equivalence between the truncated and full-depth mooring system is still a tuff work. However, the wind and current loads can be tested accurately in wind tunnel model. Furthermore, the wave can be simulated accurately in wave tank test. The full-scale mooring system and the all environment loads can be simulated accurately by using the numerical model based on the model tests simultaneously. In this paper, the air gap response of a floating platform is calculated based on the results of tunnel test and wave tank. Meanwhile, full-scale mooring system, the wind, wave and current load can be considered simultaneously. In addition, a numerical model of the platform is tuned and validated by ANSYS AQWA according to the model test results. With the support of the tuned numerical model, seventeen simulation cases about the presented platform are considered to study the wave, wind, and current loads simultaneously. Then, the impact analysis studies of air gap motion regarding the length, elasticity, and type of the mooring line are performed in the time domain under the beam wave, head wave, and oblique wave conditions. 相似文献
8.
Offshore wind turbines can exhibit dynamic resonant behavior due to sea states with wave excitation frequencies coinciding with the structural eigenfrequencies. In addition to significant contributions to fatigue actions, dynamic load amplification can govern extreme wind turbine responses. However, current design requirements lack specifications for assessment of resonant loads, particularly during parked or idling conditions where aerodynamic damping contributions are significantly reduced. This study demonstrates a probabilistic approach for assessment of offshore wind turbines under extreme resonant responses during parked situations. Based on in-situ metocean observations on the North Sea, the environmental contour method is used to establish relevant design conditions. A case study on a feasible large monopile design showed that resonant loads can govern the design loads. The presented framework can be applied to assess the reliability of wave-sensitive offshore wind turbine structures for a given site-specific metocean conditions and support structure design. 相似文献
9.
以超大型风力机(DTU 10 MW)为研究对象,对现有的大型(NREL 5 MW)无撑杆半潜浮式风力机支撑平台进行放大设计,用于支撑超大型风力机,基于气动-水动-伺服-弹性全耦合计算模型,根据设定的典型工况,使用FAST软件对超大型和大型无撑杆的半潜浮式风力机系统进行时域耦合分析,并依据计算结果对超大型和大型浮式风力机系统的运动响应和结构动力反应等特性进行对比分析。研究发现:半潜浮式风力机大型化后,气动荷载效应对风力机系统的激励作用更为突出,使得浮式平台运动由风荷载激励的低频共振反应比例增大,波频运动比例减小,这也导致由浮式平台低频运动激励的锚链张力反应增大。此外,高倍的飞轮转动频率对大型半潜浮式风力机叶片、塔架结构的激励作用较超大型半潜浮式风力机更为显著。 相似文献
10.
The asymmetric or periodically varying blade loads resulted by wind shear become more significant as the blade length is increased to capture more wind power. Additionally, compared with the onshore wind turbines, their offshore counterparts are subjected to additional wave loadings in addition to wind loadings within their lifetime. Therefore, vibration control and fatigue load mitigation are crucial for safe operation of large-scale offshore wind turbines. In view of this, a multi-body model of an offshore bottom-fixed wind turbine including a detailed drivetrain is established in this paper. Then, an individual pitch controller (IPC) is designed using disturbance accommodating control. State feedback is used to add damping in flexible modes of concern, and a state estimator is designed to predict unmeasured signals. Continued, a coupled aero-hydro-servo-elastic model is constructed. Based on this coupled model, the load reduction effect of IPC and the dynamic responses of the drivetrain are investigated. The results showed that the designed IPC can effectively reduce the structural loads of the wind turbine while stabilizing the turbine power output. Moreover, it is found that the drivetrain dynamic responses are improved under IPC.
相似文献11.
Dynamic analysis of tension leg platform for offshore wind turbine support as fluid-structure interaction 总被引：2，自引：1，他引：1
Tension leg platform (TLP) for offshore wind turbine support is a new type structure in wind energy utilization.The strong-interaction method is used in analyzing the coupled model,and the dynamic characteristics of the TLP for offshore wind turbine support are recognized.As shown by the calculated results:for the lower modes,the shapes are water’s vibration,and the vibration of water induces the structure’s swing;the mode shapes of the structure are complex,and can largely change among different members;the mode shapes of the platform are related to the tower’s.The frequencies of the structure do not change much after adjusting the length of the tension cables and the depth of the platform;the TLP has good adaptability for the water depths and the environment loads.The change of the size and parameters of TLP can improve the dynamic characteristics,which can reduce the vibration of the TLP caused by the loads.Through the vibration analysis,the natural vibration frequencies of TLP can be distinguished from the frequencies of condition loads,and thus the resonance vibration can be avoided,therefore the offshore wind turbine can work normally in the complex conditions. 相似文献
12.
13.
当FPSO服役于目标油田时,将受到风浪流的作用力。其中,风力给FPSO一个恒定的静力,使其偏离原来的位置。风力计算在FPSO系泊系统的分析过程中是非常重要的。设计人员常常参考OCIMF进行风力计算,或者参考API规范得出。OCIMF为针对油轮的计算规范,但使用OCIMF计算FPSO风力及流力的方法,与FPSO的适应性仍需要进一步论证。API规范针对海上浮式系统,其计算风流力的方法使用也非常广泛,其原理为将FPSO上部各个模块风力叠加得出。以FPSO风载荷为研究对象,开展了风洞模型试验,获得了典型FPSO风载荷特性曲线,并将试验结果分别与OCIMF结果和API规范计算结果进行对比分析,最终给出FPSO风力计算方法的建议。本数据可用于FPSO的风力计算,也可为FPSO运动、系泊的设计研究提供参考。 相似文献
14.
海上风力发电单立柱支撑结构拟静力分析 总被引：1，自引：0，他引：1
海上风电支撑结构不同于一般海洋结构物,它受到复杂的风机气动荷载、机械控制荷载和海洋环境荷载的多重作用。文章针对海上某单立柱风电支撑结构,通过分析其结构固有频率的约束限制以及外环境荷载的动力特性,综合考虑外环境荷载尤其是风机荷载的动力放大影响,给出海上单立柱风电支撑结构的拟静力分析思路。并进行极端及操作工况下支撑结构在风、浪、流环境荷载组合作用的应力计算和强度分析。提出该种结构在使用现有海洋结构物设计规范和风机设计规范时的注意事项。该分析比较结果及结论可作为海上类似风电支撑结构的设计参考。 相似文献
15.
作用在海洋移动式平台上的风倾载荷 总被引：2，自引：0，他引：2
本文在归纳国内外对作用在海洋移动式平台风倾载荷的研究文献的基础上，分析了目前船级社的规范中风载荷计算方法中的几个问题。本文介绍了作者编制的风倾力臂横截曲线计算程序，并给出了计算实例 相似文献
16.
海上支撑结构的优化设计是海上风机技术发展的必然趋势,降低支撑结构的载荷是保证风机安全运行的有效途径。海上支撑结构受到风浪复杂环境荷载作用,风、浪载荷决定着塔底承受较大的剪力和倾覆力矩,同时风浪的随机性和周期性会影响塔架的疲劳载荷。基于海上风机支撑结构频率对载荷影响的研究,分析海上支撑结构频率对叶片根部挥舞和摆振响应的影响,探究频率对风机响应的影响机理。研究表明：波浪频率诱导是基础疲劳载荷响应的主要原因;开展单桩基础设计,当整机频率确定时,基础变径段可设置于浪溅区下部区域范围;叶片摆振响应受1P频率影响较大,在风机设计时可增加叶片摆振方向的阻尼;当整机频率邻近3P频率时,塔筒刚度变化对基础载荷响应的影响大于基础刚度变化;海上支撑结构设计时可优先考虑塔筒刚度。 相似文献
17.
18.
随着风电产业向深远海发展,浮式风机已经成为海上风机未来的发展趋势.由于复杂的风浪联合环境载荷作用,浮式风机作业时通常会产生大幅度的运动响应,这一方面会使得浮式风机系统受到的水动力载荷更加复杂,另一方面会影响浮式风机的输出功率.因此,如何有效地抑制浮式风机系统的运动响应就成为了设计的关键.基于非稳态致动线模型和两相流求解器naoeFOAM-SJTU,进行了带垂荡板的浮式风机耦合性能研究.首先在OC3-Hywind Spar平台上附加垂荡板,并结合NREL-5 MW风力机建立带垂荡板的浮式风机模型.其次对比不同形状的垂荡板对Spar-5 MW型浮式风机气动—水动耦合结果,分析相同风浪联合作用条件下垂荡板形状对浮式风机耦合响应的影响.研究结果表明:垂荡板能够减小纵荡和垂荡等运动响应幅值,但是对纵摇运动响应影响较小;当垂荡板直径和吃水位置相同时,相同风浪条件下圆形垂荡板能使浮式风机的气动平均功率增大约0.844％,而正方形垂荡板却使平均功率减小1.492％,这说明圆形垂荡板对浮式风机系统的作用效果整体而言优于正方形. 相似文献
19.
研究浅水半潜式大功率浮式风力机波浪载荷和气动力引起的基础结构疲劳损伤,揭示基础结构的疲劳损伤机理。采用谱疲劳损伤计算分析方法,以10 MW风力机为例,计算波浪载荷引起的热点应力及多种海况引起的疲劳损伤。采用叶素动量理论并基于所在海域的风速分布,计算叶轮转动引起的气动力及其引起的疲劳损伤。计算结果表明,对于半潜式三立柱浮式风力机,波浪载荷引起的基础结构应力远大于气动力引起的基础结构应力,基础结构损伤主要是由波浪载荷引起,气动力引起的浮式基础结构的损伤为10-3量级,而波浪载荷引起的损伤为10-1量级。 相似文献
20.
海上风电工程主要受到风、波浪及洋流等产生的水平循环荷载作用,本文研究楔形单桩基础在水平循环荷载作用下的变形规律,并探讨不同循环荷载对变形规律产生的影响,以确保风电设施正常运行。通过数值模拟建立海上风电单桩-海床模型,考虑土体超孔隙水压力的演变规律及土体致密规律,土体采用UBC3D-PLM本构模型。本文重点讨论并分析在不同水平循环荷载作用下楔形单桩基础与等截面单桩基础的桩周土体位移、塑性应变及桩基累计转角位移之间的差异。研究结果表明：楔形结构会降低桩周土体位移及塑性应变,使得楔形单桩基础旋转中心位置更低,产生倾覆的可能更小,当循环荷载比为0.7时,累计转角位移能减少41.86%;循环荷载越大,楔形单桩基础水平受荷特性越好,累计位移减少量的增长率越高。研究成果可为今后海上风电基础的选择与设计提供参考。 相似文献