共查询到19条相似文献,搜索用时 78 毫秒
1.
2.
“鱼鹰”号载人潜器打捞机械手的研制 总被引:2,自引:0,他引:2
本文介绍国内研制的第一只打捞机械手,该机械手的最大伸距为2805mm,抓举能力为1000N,有三个自由度,机械手备有三种手爪,可根据作业内容的不同进行更换,当机械手手爪抓获沉物超过100kg时,可实行手爪的自动或手动解脱,供水面母船起吊回收,在危及潜器及操作人员生命安全情况下,机械手可实现应急抛弃。文中,作者从现代设计法的角度出发,对机械手的性能及结构设计特点等方面进行了阐述。该机械手安装于“鱼鹰”号载入潜器上,在很短时间内,已可靠地从水下打捞起3t多贵重沉物,获明显的济经效益。使用证明,打捞机械手性能良好,完全能满足水下打捞作业的要求。 相似文献
3.
提出了一种分析论证码头作业天数的新方法,综合分析了各水文气象因子之间的独立性与相关性,可避免重复计算不利作业情况,充分利用可作业时间。使用南通市如东县阳光岛附近海域2012年一整年连续风、浪、能见度等实测资料,依据液化天然气码头装卸作业标准,采用新方法综合分析码头可作业天数,并与常规方法进行了比较。结果显示,新方法比常规方法更简单,结果也更精确。同时,本文给出了2012年全年、各季的可装卸作业天数及不利作业天数结果,供相关部门参考使用。 相似文献
4.
5.
海洋钻修井装置作业前检验,是海上钻修井作业过程中的重要环节。做好作业前检验工作,使作业装置满足作业和安全的要求,是后续作业顺利、安全、高效进行的重要保障。文章根据南海西部近5年来海洋钻修井装置作业前检验工作的现状,从管理、技术层面对作业前检验存在的问题进行剖析,并给出了相关建议。如:作业前检验全生命周期管理的流程及强化措施;保持验船人员的公用机制;引进、培养一支固定的验船队伍;制定验船标准化手册;增加验船技术手段等。为进一步提高海洋钻修井装置检验质量及海上钻修井作业保驾护航。 相似文献
6.
7.
利用2008年5月23—26日山东一次冰雹过程的常规气象资料,分析了此次冰雹形成的天气形势、层结条件及其触发机制等;分析了两个极相似云体在催化和未催化情况下从初生、发展到消亡的演变特征。结果表明,防雹作业加剧了冰雹云的消亡过程,表现为回波强度减弱、回波高度下降、VIL减小、生命史缩短等特征。通过对对流云系的横向和纵向对比分析,收集了18个防雹作业样本,并利用这些样本作业前后的回波强度和回波高度两个物理量进行统计检验,在显著性水平分别为1%和5%的情况下,防雹作业后回波强度减弱、回波高度下降,即防雹作业有效。利用济南防雹作业数据对防雹作业效果进行的模拟定量检验表明,防雹作业可减少降雹约27%。 相似文献
8.
传统的(陆地)工程横断面测绘是一件非常繁琐的事情,其内业处理时间超过外业采集时间,修改不易。为此研制的横断面测绘系统,用类似于大比例尺数字化测图电子手簿作业模式,实现了从野外数据采集到内业成果成图的一体化,具有传统手工作业无法比拟的优越性。本文介绍了该系统的配置、作业流程、作业步骤、特点及其在实践中的应用情况。 相似文献
9.
10.
11.
Wave effects on ascending and descending motions of the autonomous underwater vehicle 总被引:1,自引:0,他引:1
In the paper, a hydrodynamic model including the characteristics of maneuvering and seakeeping is developed to simulate the six-degree of freedom motions of the underwater vehicle steering near the sea surface. The corresponding wave exciting forces on the underwater vehicle moving in waves are calculated by the strip theory, which is based on the source distribution method. With the hydrodynamic coefficients relevant to the maneuvering and seakeeping, the fourth-order Runge–Kutta numerical method is adopted to solve the equations of motions and six-degrees of freedom of the motions for the underwater vehicle steering near the free surface can be obtained. The wave effect on the corresponding motions of the underwater vehicle is investigated and some interesting phenomena with respect to different wave frequencies and headings are observed. The hydrodynamic numerical model developed here can be served as a valuable tool for analyzing the ascending and descending behaviors of the underwater vehicle near the sea surface. 相似文献
12.
水下拖体声学超短基线定位测量及其卡尔曼滤波技术 总被引:4,自引:2,他引:4
水声超短基线定位技术是探测水下目标的有效手段。超短基线定位测得的原始数据具有不同程度的随机离散性。为了得到能够真实反映目标运动轨迹变化的坐标数据 ,本文应用了卡尔曼滤波技术来处理定位原始数据 ,取得了良好的结果 相似文献
13.
A discrete time-delay control (DTDC) law for a general six degrees of freedom unsymmetric autonomous underwater vehicle (AUV) is presented. Hydrodynamic parameters like added mass coefficients and drag coefficients, which are generally uncertain, are not required by the controller. This control law cancels the uncertainties in the AUV dynamics by direct estimation of the uncertainties using time-delay estimation technique. The discrete-time version of the time-delay control does not require the derivative of the system state to be measured or estimated, which is required by the continuous-time version of the controller. This particularly provides an advantage over continuous-time controller in terms of computational effort or availability of sensors for measuring state derivatives, i.e., linear and angular accelerations. Implementation issues for practical realization of the controller are discussed. Experiments on a test-bed AUV were conducted in depth, pitch, and yaw degrees of freedom. Results show that the proposed control law performs well in the presence of uncertainties. 相似文献
14.
15.
海况对水下运载器吊放回收的影响 总被引:1,自引:1,他引:1
本文将水下运载器,吊索和母船看作是一个由弹簧连接的单自由度系统,通过对系统进行分析和研究,建立了水下被吊物体在吊索带动下,由吊臂端点运动引起的运动响应的物理模型、数学方程,并编制了各项参数可调的计算机程序以求解水下物体的运动轨迹。运用此程序,对影响参数作系列变化后进行了运动响应计算,并绘制成运动响应随这些参数变化的曲线,为水下吊放回收系统的设计提供了依据 相似文献
16.
以7 000 m载人潜水器的工程需求为背景,以水下单目摄像机为视觉传感器,进行了水下机器人动力定位方法研究。该动力定位方法利用视觉系统测量得到水下机器人与被观察目标之间的三维位姿关系,通过路径规划、位置控制和姿态控制分解,逐步使机器人由初始位姿逼近期望位姿并最终定位于期望位姿,从而实现了机器人的4自由度动力定位。通过水池实验验证了提出的动力定位方法,并且机器人能够抵抗恒定水流干扰和人工位置扰动。同时,该动力定位方法还可以实现机器人对被观察目标的自动跟踪。 相似文献
17.
Depth-trim mapping control of underwater vehicle with fins 总被引:1,自引:1,他引:0
Underwater vehicle plays an important role in ocean engineering.Depth control by fin is one of the difficulties for underwater vehicle in motion control.Depth control is indirect due to the freedom coupling between trim and axial motion.It includes the method of dynamic analysis and lift-resistance-coefficient experiment and theory algorithm.By considering the current speed and depth deviation,comprehensive interpretation is used in object-planning instruction.Expected depth is transformed into expected trim.Dynamic output fluctuation can be avoided,which is caused by linear mapping of deviation.It is steady and accurate for the motion of controlled underwater vehicles.The feasibility and efficiency of the control method are testified in the pool and natural area for experiments. 相似文献
18.
针对现有拖曳式水下潜器控制机构复杂、航向与姿态不容易稳定的缺陷,提出和设计了一种具有航向与姿态稳定的多自由度可控制拖曳式水下潜器样机。该样机主要由鱼雷状浮体、固定水平主翼、转角可控制襟翼、立式翼型主体等部分组成,潜器的深度控制通过控制襟翼的偏转来诱导固定水平主翼攻角的改变来实现;潜器的横荡运动操纵以通过控制两个作为转艏控制器的导管螺旋桨的转向与转速、诱导立式翼型主体产生诱导力矩使其产生横向偏转来进行。文中所提出和设计的样机具有运动过程中自我稳定能力强、航向稳定性好、控制机构简单并具有较高实用价值的特点。 相似文献